Site Information

 Loading... Please wait...
  • My Account
  • Gift Certificates
  • All prices are in United States Minor Outlying Islands USD

  • Yongnuo YN-685 + YN 622C-TX
  • YN 622C-TX
  • YN 622C-TX
  • Image 4
  • Yongnuo YN-685
  • Yongnuo YN-685

Yongnuo YN-685 Wireless Manual Flash + YN 622C-TX Controller for Canon 650D 1Dx

0.00 Grams
Free Shipping

Product Description

YONGNUO YN 685 TTL 2.4G HSS 1/8000 Flash Speedlite + 1 x YN-622C TX Flash Trigger for Canon


◆Completely Compatible with YONGNUO YN622C and RF-603 Wireless System
YN685 supports respectively receiving wireless triggering signal from YN622C, YN622C-TX, YN560IV, YN560-TX, RF605, RF603II and RF603.

◆Remote Control Off-camera Parameters of Each Group
The flash mode, flash intensity, focal length and sync mode (YN622C wireless system only) of the speed-lite in each group can be controlled remotely through YN622C transceiver and YN560IV/YN560-TX.

YN685 is a 2.4G wireless speed-lite of high guide number, which supports TTL, M and Multi mode.

◆High Speed Sync (HSS)
When HSS function is activated, this speed-lite YN685 can be used with every shutter speed and the maximum sync speed is up to 1/8000s. Note: The camera and transceiver should support HSS function. 

◆Ultra fast Charging Recycle System, supporting External Power Supply
The recycling time is 3 seconds when the power output is set to maximum. The recycling time is about 4~5 seconds even this speed-lite is used without using fresh batteries. In addition, you can use the external power supply to meet your higher charging recycle need.

◆Supports Auto/Manual Zooming
YN685 supports auto and manual zooming, and the flash coverage can be changed between 20~200mm.

◆Supports Sound Prompt Function, Custom Settings (Fn.) and Auto Save Settings

◆Equipped with Big Size LCD Display Screen, standard PC Synchronous Interface

Wireless Slave Mode

1. YN622C Wireless System ( there are total 7 channels and 3 groups )
---Remote Control mode: the remote control mode of YN685 is compatible with the master unit is YN622C-TX, the master unit is YN-622C, and the YN-622C has been enabled the remote control mode.
---Mix mode: the remote control mode of YN685 is compatible with the master unit is YN-622C, and the YN-622C has been enabled the mix mode

2. RF-603 Wireless System ( there are total 16 channels and 6 groups )
---It can receive the wireless trigger signal from YN-560 IV, YN560-TX, RF-605, RF-603 II

3. Multi-flash Wireless Flash Configuration
---Wireless flash of two slave units made up by YN685
---Wireless flash of multiple slave units made up by YN685

  • ETTL, M, MULTI Mode
  • GN60@ISO100, 200m --- 2.4G wireless speedlite of high guide number
  • Power Saving Mode
  • Overheat protection
  • Modeling Flash
  • PC Sync Port
  • Automatic Setting Saving
  • Clear Settings
  • High-speed Sync, Second-curtain Sync, Flash Exposure Compensation, Exposure Bracketing ( FEB ), FE Lock
  • The flash Rang Setting
  • High-speed Continuous Shooting
  • Auto / Manual Zooming
  • Ultra fast Charing Recycle System, supporting External Power Supply


ETTL /M / Multi 
HSS to 1/8000th 
1st Curtain Sync / 2nd Curtain Sync 
FEC / FEB – 1/3rd Increments (±3 stops) 
Remote Flash Power – 1/128 – 1/1 (1/3rd increments) 
Remote Flash Zoom 20-200mm – Auto and Manual 
Group Control 

Remote Flash Power – 1/128 – 1/1 (1/3rd increments) 
Remote Flash Zoom 20-200mm – Auto and Manual 
Group Control 

Fire the Flash 
Group Control 

Fire the Flash Only


High-speed Sync 

The max. sync speed is 1/8000s

Guide No.

60meters (ISO 100, 200mm)

Flash mode


Trigger mode

set-top,wireless off-camera

Wireless triggering distance

20~25m indoor, 10~15m outdoor

Circuit design

 Insulated Gate Bipolar Transistor( IGBT)

Zoom range

AUTO, 20,24,28,35,50,70,80,105,135 200mm

Vertical rotation angle

70~90 degrees

Horizontal rotation angle

0~360 degrees

Power supply

4×AAsize batteries (Alkaline or Ni-MH are usable)

Lighting times

100~1500 times (AA alkaline cell used)

Recycle time

approx 3s (AA alkaline cell used)

Color temperature


Flash time


Flash control

8 levels of output control (1/128~1/1), 29 levels of fine tuning

External interface

hot shoe, PC port and eternal power interface

External power

YONGNUO External Flash Pack like SF-18C, SF-17C

Wireless triggering distance


Additional features

second-crutain sync, high speedlite sync, FEC, FEB, FEV, the electrontic flash head zooming,manual zoom, auto zoom, sound prompt, automatically saving setting, PC port, power saving mode and over heat protection


66×210×77mm (Extended state)

Net weight


Compatible with

1) Hot shoe TTL mode:

Canon 1Dx, 1Ds series, 1D series, 5DIII, 5DII, 5D, 7D, 7DII 70D, 60D, 50D, 40D, 30D, 20D, 700D, 750D 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D,100D, 1100D, 1000D, 1200D

2) Wirelss TTL Slave mode:

Canon 5DIII 7D 70D 60D 700D 650D 600D, Yongnuo ST-E2, Canon 580EX II

3) Wireless Manual ( RF-603 mode ) System

Yongnuo YN-560IV, YN560-TX, RF-605, RF-603 II
ALL DSLR Standard Hot shoe Camera


Description of YN-622C-TX LCD Flash Controller

  • LCD Screen display, and multi-buttons for quick operation
  • The firmware can be upgraded through the USD interface
  • Supports wireless shutter release function
  • The focal length(zoom) of the A/B/C three groups flash can be adjusted separetely
  • Support TTL ratio A:B / A:B:C
  • AF-assist beam emitter function (can be disabled)
  • Flash mode: GR(grouping flash)/E-TTL(II)/Multi flash
  • Supports mixed use of E-TTL(II) Mode, manual flash model or super sync(SS) of A/B/C group flash
  • The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately
  • Shutter Sync: 1st-curtain sync, 2nd-curtain sync and high-speed sync, the highest sync speed is 1/8000s
  • Supports FEC, FEB, FEL
  • Supports modeling flash
  • Support the flash zooming(auto, manual)
  • Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows
  • Settings saved automatically
  • The flash sync signal can be input through the PC port
  • Supports the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (Non canon body)
(The above functions need to be used with the YN-622C transceiver.) 
Parts of funtions may refer to manufacturer of the camera and flash (FEL, Modeling Flash) )

  • System type: Digital FSK 2.4GHz wireless controller
  • Distance: 100M
  • Channel: 7
  • Flash mode: GR(E-TTL(II), manual, Super Sync)/E-TTL(II)/Multi flash
  • Sync mode: 1st-curtain, 2nd-curtain, High-Speed Sync(HSS)
  • Groups: 3Groups(A/B/C)
  • Max Sync Speed: 1/8000S
  • Trigger Interface: Hot-Shoe, PC port
  • Shutter release interface: 2.5MM Shutter release interface
  • TTL Ratio: Support
  • USB Firmware Upgrade: Support
  • AF Assist Beam Emitter: Support
  • Zoom: Support
  • Battery: AAx2 (Not Include)
  • Stand-by time: 120h
  • Dimensions: 89.5 x 53 x 39mm
Compatible Camera List
- Canon EOS Series DSLR 
Cameras compatible with the shutter release cable (parts): 
LS-2.5/C1: 60D, 70D, 400D Series, 500D Series, 600D Series, 1000D Series 
LS-2.5/C3: 40D, 50D, 7D, 1D Series, 5D Series 


Package Include

  • 1 x Yongnuo YN-685 Manual Flash Controller for Canon
  • 1 x YN-622C-TX Wireless Flash Controller
  • 1 x LS-2.5/C1 Shutter Connecting Cable
  • 1 x LS-2.5/C3 Shutter Connecting Cable
  • 1 x User Manual in English and Chinese
NOTE: Batteries not included

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the Yongnuo YN-685 Wireless Manual Flash + YN 622C-TX Controller for Canon 650D 1Dx to your wish list.